Standard Hardware Security Not Supported [Error Fix]

You should enable the virtualization technology (Hyper-V) in BIOS

by Madhuparna Roy
Madhuparna Roy
Madhuparna Roy
A diploma holder in computers and with a keen interest in technology, Madhuparna is passionate about writing How-to guides and helping people solve the most intricate Windows issues.... read more
Reviewed by Alex Serban
Alex Serban
Alex Serban
Windows Server & Networking Expert
After moving away from the corporate work-style, Alex has found rewards in a lifestyle of constant analysis, team coordination and pestering his colleagues. Holding an MCSA Windows Server... read more
Affiliate Disclosure
  • If you have recently reset your PC or upgraded to Windows 11, you may see the Standard hardware security not supported n notification in the Windows Security app
  • While the Standard hardware security not supported notification is usually seen in Windows 11, version 22H2, it can also occur for other versions.
  • The error may usually appear if your device does not meet the minimum requirements for hardware security. However, there could be other reasons as well. 
standard hardware security not supported fix
XINSTALL BY CLICKING THE DOWNLOAD FILE
To fix Windows PC system issues, you will need a dedicated tool Fortect is a tool that does not simply clean up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:
  1. Download Fortect and install it on your PC.
  2. Start the tool's scanning process to look for corrupt files that are the source of your problem
  3. Right-click on Start Repair so the tool could start the fixing algorythm
  • Fortect has been downloaded by 0 readers this month.

Some users have been complaining that they see a notification in their Windows Security app that says, Standard hardware security not supported.

At the same time, this error seems to appear even if the device meets the standards for hardware security, and has the latest drivers, Windows updates, and BIOS firmware installed.

What does it mean by standard hardware security not supported?

Having said that, this message occurs when your device does not meet at least one of the requirements of standard hardware security:

  • The device has TPM 2.0 (security processor), and it’s enabled
  • Secure boot is enabled
  • DEP is turned on (Data Execution Prevention)
  • UEFI MAT ((Unified Extensible Firmware Interface Memory Memory Attributes Table)
  • CPU Virtualization is enabled

What causes standard hardware security not supported?

So, if you see the Standard hardware security not supported error notification in Windows 11, it could be because:

  • The minimum requirements for hardware security are not met – It could be possible that the TPM 2.0, secure boot, or virtualization is not enabled in the BIOS settings.
  • Outdated system drivers – If the drivers are not updated to the latest version, this may trigger the standard hardware security not supported error.
  • BIOS firmware not updated – Chances are that you see the error notification due to outdated BIOS firmware.
  • Corrupted Windows update – Sometimes, it could be a corrupted Windows update causing the error.
  • Recurrent Windows 11 bug – In many cases, it has been reported that the standard hardware security not supported error shows up due to a bug in the OS.

What can I do if standard hardware security is not supported on Windows 11?

Before you move over to the main section to try the primary methods, here are a few quick checks:

However, if none of the above steps help you eliminate the standard hardware security not supported error, we have some expert tips to fix the issue.

1. Enable Data Execution Prevention (DEP)

  1. Press the Win + R keys to open the Run dialogue. Type sysdm.cpl and hit Enter to open System Properties. sysdm.cpl command
  2. Now, select the Advanced tab, and under Performance, click on Settings.performance settings
  3. Next, go to the Data Execution Prevention tab, and select Turn on DEP for essential Windows programs and services only option. Press Apply and OK. Turn on DEP for essential Windows programs and services only

Now, restart your PC and check if you could successfully fix the standard hardware security not supported error in Windows 11 or if you still see the notification.

2. Enable BIOS settings

  1. Access BIOS on your PC, select UEFI Firmware Settings, and select Expert mode.
  2. Here, go to CPU settings or System Configuration, look for either Intel Virtualization TechnologyVirtualization TechnologyVT-xAMD-V, or SVM, and set it to Enable. enable virualizartion
  3. This enables Core isolation in Windows Security.
  4. Next, under the Advance tab, navigate to System Agent Configuration or North Bridge Configuration, and enable VT-d or IOMMU to enable Memory integrity in Windows Security.enable vt-d
  5. Now, enable Intel Platform Trust Technology (PTT) or the AMD equivalent, and the motherboard chipset acts as a TPM. This enables the Security processor in Windows Security. enable Intel Platform Trust Technology (PTT)
  6. Next, enable Secure Boot, and select Install default Secure Boot keys. select Install default Secure Boot keys
  7. Here, select Windows UEFI mode for OS type. This will turn on Secure boot in Windows Security.select windows UEFI mode
  8. Press F10 to save and exit.

Now, open the Windows Security app, and the standard hardware security not supported notification should be gone.

Expert tip:

SPONSORED

Some PC issues are hard to tackle, especially when it comes to missing or corrupted system files and repositories of your Windows.
Be sure to use a dedicated tool, such as Fortect, which will scan and replace your broken files with their fresh versions from its repository.

You will now see that Core isolation, Security processor, and Secure boot options are enabled in Windows security.

3. Downgrade to Windows 10 and upgrade again

  1. Downgrade Windows 11 to Windows 10 using the Windows 10 installation media.
  2. Now that you are done setting up, click on the Windows Security icon in the system tray. click on windows security icon
  3. Next, in the Windows Security app, click on Device Security on the left. Now, on the right, go to Core Isolation and click on Core isolation details. Core isolation details
  4. On the next screen, go to Memory integrity, and turn it on to scan for Incompatible Drivers. Memory integrity
  5. You can now pick a driver remover to completely uninstall all traces of the incompatible drivers.
  6. Repeat steps 2 to 5 again, and see if there are incompatible drivers. If not, enable it and restart the computer.
  7. Finally, upgrade your PC to Windows 11 using the Windows 11 ISO, and the standard hardware security not supported error should be fixed.

You can also follow the instructions in our detailed post to learn how to downgrade Windows 11 to 10 on a new laptop.

4. Reregister Windows Security App using PowerShell

  1. Press the Win + R shortcut keys to open the Run console. Type in Powershell, and press the Ctrl + Shift + Enter keys together to launch the elevated Powershell window. run powershell command
  2. Now, run the below command in the Powershell (Admin) window and hit Enter: PowerShell -ExecutionPolicy Unrestricted -Command "& {$manifest = (Get-AppxPackage *Microsoft.Windows.SecHealthUI*).InstallLocation + '\AppxManifest.xml' ; Add-AppxPackage -DisableDevelopmentMode -Register $manifest}"reregister windows security app
  3. Once the command executes successfully, close PowerShell and restart the PC. This should help you fix the standard hardware security error in Windows 11.

To know more on how to reinstall Windows Security on Windows 11, you can refer to our detailed guide for more information.

5. Reinstall the Windows Security Platform

  1. Download the latest version of the Windows Security app. Now, create a restore point, and then unzip the downloaded ZIP file on the desktop.
  2. Next, press the Win + E keys to open File Explorer, navigate to C:\Windows\System32\SecurityHealth, right-click on the setup file, and select Properties. open securityhealthsetup properties
  3. Now, follow the below path to change to Administrators, and take ownership of that folder: Properties > Security tab, > Advanced > Owner > Change > Select User or Group > Advancedclick on Advanced
  4. In the next window, click on Find Now, go to the Search results, select Administrators, and press OK.select administrators
  5. In the Select User or Group dialog, click on Check Names and press OK. check names
  6. Now, in the Advanced Security Settings window, select Replace owner on sub containers and objects, press Apply and OK to save the changes, and return to the Properties dialog. select Replace-owner-on-sub-containers-and-objects
  7. Here, under Group or user names, select Administrators, and click on Edit. edit administrators permissions
  8. Next, in the Permissions window, select Administrators, and check the Allow box next to Full Control. Press Apply and then OK. take full control
  9. Back in the SecurityHealth folder in the File Explorer window, copy the 1.0.2207.20002-0 folder, and paste it on the Desktop to the SecurityHealth folder. copy 1.0.2207.20002-0 folder to desktop
  10. Now, you can open the folder and run the application Microsoft.SecHealthUI_8wekyb3d8bbwe.appx as an administrator.

Once done, restart your PC, and check if this helps eliminate the standard hardware security error.

Also, you must check if the BIOS is updated. If not, then update the BIOS firmware to the latest version to fix the standard hardware security not supported issue.

Besides, if your device already meets the hardware security standards, you can simply access the BIOS settings, disable the virtualization and enable it again.

If none of the above methods work, you may do a clean install of Windows 11 using a USB, and this should help you get rid of the issue.

For any other queries related to Windows 11 or the Windows Security app, do let us know in the comments section below.

Still experiencing issues?

SPONSORED

If the above suggestions have not solved your problem, your computer may experience more severe Windows troubles. We suggest choosing an all-in-one solution like Fortect to fix problems efficiently. After installation, just click the View&Fix button and then press Start Repair.

This article covers:Topics: